farm families. Wood presses featuring intricate decoration were used to press the butter into pucks or small bricks to be sold at a nearby market or general store with the decoration identifying the farm which produced the butter. This continued until production was mechanized and butter was produced in less decorative stick form.[31] Today butter presses continue to be used for decorative purposes.
Per capita butter consumption declined in most western nations during the 20th century, in large part because of the rising popularity of margarine, which is less expensive and, until recent years, was perceived as being healthier. In the United States, margarine consumption overtook butter during the 1950s,[32] and it is still the case today that more margarine than butter is eaten in the U.S. and the EU.[33]
Size and shape of butter packaging[edit]
In the United States, butter is usually produced in 4-ounce sticks, wrapped in waxed or foiled paper and sold four to a one-pound carton. This practice is believed to have originated in 1907, when Swift and Company began packaging butter in this manner for mass distribution.[34]
Western-pack shape butter
PCC Dairy Butter, made from Philippines' water buffalo's cream milk. (Philippine Carabao Center)
These sticks are commonly produced in two different shapes:
The dominant shape east of the Rocky Mountains is the Elgin, or Eastern-pack shape, named for a dairy in Elgin, Illinois. The sticks are 121 millimetres (4.8 in) long and 32 millimetres (1.3 in) wide and are typically sold stacked two by two in elongated cube-shaped boxes.[35]
West of the Rocky Mountains, butter printers standardized on a different shape that is now referred to as the Western-pack shape. These butter sticks are 80 millimetres (3.1 in) long and 38 millimetres (1.5 in) wide and are usually sold with four sticks packed side-by-side in a flat, rectangular box.[35] The shape was altered for the West Coast because of the higher average temperature; having a smaller surface-area-to-volume ratio allowed the stick of butter to remain on the counter longer without melting.[36]
Both sticks contain the same amount of butter, although most butter dishes are designed for Elgin-style butter sticks.[35]
The stick's wrapper is usually marked off as eight tablespoons (120 ml or 4.2 imp fl oz; 4.1 US fl oz); the actual volume of one stick is approximately nine tablespoons (130 ml or 4.6 imp fl oz; 4.4 US fl oz).
Outside of the United States, butter is packaged and sold by weight only, not by volume (fluid measure) nor by unit (stick), but the package shape remains approximately the same. The wrapper is usually a foil and waxed-paper laminate (the waxed paper is now a siliconised substitute, but is still referred to in some places as parchment, from the wrapping used in past centuries; and the term 'parchment-wrapped' is still employed where the paper alone is used, without the foil laminate).
Friday, December 13, 2013
ce that Emperor Napoleon III offered prize money for an inexpensive substitute to supplement France's inadequate butter supplies. A French chemist claimed the prize with the invention of margarine in 1869. The first margarine was beef tallow flavored with milk and worked like butter; vegeta
e common fare among the middle class, and the English, in particular, gained a reputation for their liberal use of melted butter as a sauce with meat and vegetables.[21]
In antiquity, butter was used for fuel in lamps as a substitute for oil. The Butter Tower of Rouen Cathedral was erected in the early 16th century when Archbishop Georges d'Amboise authorized the burning of butter instead of oil, which was scarce at the time, during Lent.[22]
Across northern Europe, butter was sometimes treated in a manner unheard-of today: it was packed into barrels (firkins) and buried in peat bogs, perhaps for years. Such "bog butter" would develop a strong flavor as it aged, but remain edible, in large part because of the unique cool, airless, antiseptic and acidic environment of a peat bog. Firkins of such buried butter are a common archaeological find in Ireland; the Irish National Museum has some containing "a grayish cheese-like substance, partially hardened, not much like butter, and quite free from putrefaction." The practice was most common in Ireland in the 11th–14th centuries; it ended entirely before the 19th century.[20]
Industrialization[edit]
Like Ireland, France became well known for its butter, particularly in Normandy and Brittany. By the 1860s, butter had become so in demand in France that Emperor Napoleon III offered prize money for an inexpensive substitute to supplement France's inadequate butter supplies. A French chemist claimed the prize with the invention of margarine in 1869. The first margarine was beef tallow flavored with milk and worked like butter; vegetable margarine followed after the development of hydrogenated oils around 1900.
Gustaf de Laval's centrifugal cream separator sped the butter-making process.
Until the 19th century, the vast majority of butter was made by hand, on farms. The first butter factories appeared in the United States in the early 1860s, after the successful introduction of cheese factories a decade earlier. In the late 1870s, the centrifugal cream separator was introduced, marketed most successfully by Swedish engineer Carl Gustaf Patrik de Laval.[23] This dramatically sped up the butter-making process by eliminating the slow step of letting cream naturally rise to the top of milk. Initially, whole milk was shipped to the butter factories, and the cream separation took place there. Soon, though, cream-separation technology became small and inexpensive enough to introduce an additional efficiency: the separation was accomplished on the farm, and the cream alone shipped to the factory. By 1900, more than half the butter produced in the United States was factory made; Europe followed suit shortly after.
In 1920, Otto Hunziker authored The Butter Industry, Prepared for Factory, School and Laboratory,[24] a well-known text in the industry that enjoyed at least three editions (1920, 1927, 1940). As part of the efforts of the American Dairy Science Association, Professor Hunziker and others published articles regarding: causes of tallowiness[25] (an odor defect, distinct from rancidity, a taste defect); mottles[26] (an aesthetic issue related to uneven color); introduced salts;[27] the impact of creamery metals[28] and liquids;[29] and acidity measurement.[30] These and other ADSA publications helped standardize practices internationally.
Butter also served as a source of extra income for
In antiquity, butter was used for fuel in lamps as a substitute for oil. The Butter Tower of Rouen Cathedral was erected in the early 16th century when Archbishop Georges d'Amboise authorized the burning of butter instead of oil, which was scarce at the time, during Lent.[22]
Across northern Europe, butter was sometimes treated in a manner unheard-of today: it was packed into barrels (firkins) and buried in peat bogs, perhaps for years. Such "bog butter" would develop a strong flavor as it aged, but remain edible, in large part because of the unique cool, airless, antiseptic and acidic environment of a peat bog. Firkins of such buried butter are a common archaeological find in Ireland; the Irish National Museum has some containing "a grayish cheese-like substance, partially hardened, not much like butter, and quite free from putrefaction." The practice was most common in Ireland in the 11th–14th centuries; it ended entirely before the 19th century.[20]
Industrialization[edit]
Like Ireland, France became well known for its butter, particularly in Normandy and Brittany. By the 1860s, butter had become so in demand in France that Emperor Napoleon III offered prize money for an inexpensive substitute to supplement France's inadequate butter supplies. A French chemist claimed the prize with the invention of margarine in 1869. The first margarine was beef tallow flavored with milk and worked like butter; vegetable margarine followed after the development of hydrogenated oils around 1900.
Gustaf de Laval's centrifugal cream separator sped the butter-making process.
Until the 19th century, the vast majority of butter was made by hand, on farms. The first butter factories appeared in the United States in the early 1860s, after the successful introduction of cheese factories a decade earlier. In the late 1870s, the centrifugal cream separator was introduced, marketed most successfully by Swedish engineer Carl Gustaf Patrik de Laval.[23] This dramatically sped up the butter-making process by eliminating the slow step of letting cream naturally rise to the top of milk. Initially, whole milk was shipped to the butter factories, and the cream separation took place there. Soon, though, cream-separation technology became small and inexpensive enough to introduce an additional efficiency: the separation was accomplished on the farm, and the cream alone shipped to the factory. By 1900, more than half the butter produced in the United States was factory made; Europe followed suit shortly after.
In 1920, Otto Hunziker authored The Butter Industry, Prepared for Factory, School and Laboratory,[24] a well-known text in the industry that enjoyed at least three editions (1920, 1927, 1940). As part of the efforts of the American Dairy Science Association, Professor Hunziker and others published articles regarding: causes of tallowiness[25] (an odor defect, distinct from rancidity, a taste defect); mottles[26] (an aesthetic issue related to uneven color); introduced salts;[27] the impact of creamery metals[28] and liquids;[29] and acidity measurement.[30] These and other ADSA publications helped standardize practices internationally.
Butter also served as a source of extra income for
Production[edit] Main article: Churning (butter)
1 Etymology
2 Production
aps this is a false etymology of a Scythian word.[7] Nevertheless, the earliest attested form of the second stem, turos ("cheese"), is the Mycenaean Greek tu-ro, written in Linear B syllabic script.[8] The root word persists in the name butyric acid, a compound found in rancid butter and dairy products such as Parmesan cheese.
In general use, the term "butter" refers to the spread dairy product when unqualified by other descriptors. The word commonly is used to describe puréed vegetable or seed & nut products such as peanut butter and almond butter. It is often applied to spread fruit products such as apple butter. Fats such as cocoa butter and shea butter that remain solid at room temperature are also known as "butters". In addition to the act of applying butter being called "to butter", non-dairy items that have a dairy butter consistency may use "butter' to call that consistency to mind, including food items such as maple butter and witch's butter and nonfood items such as baby bottom butter, hyena butter, and rock butter.
Production[edit]
Main article: Churning (butter)
Churning cream into butter using a hand held mixer.
Unhomogenized milk and cream contain butterfat in microscopic globules. These globules are surrounded by membranes made of phospholipids (fatty acid emulsifiers) and proteins, which prevent the fat in milk from pooling together into a single mass. Butter is produced by agitating cream, which damages these membranes and allows the milk fats to conjoin, separating from the other parts of the cream. Variations in the production method will create butters with different consistencies, mostly due to the butterfat composition in the finished product. Butter contains fat in three separate forms: free butterfat, butterfat crystals, and undamaged fat globules. In the finished product, different proportions of these forms result in different consistencies within the butter; butters with many crystals are harder than butters dominated by free fats.
Almost all commercially-made butter today begins with pasteurized cream, which is commonly heated to a relatively high temperature above 80 °C (180 °F). Before it is churned, the cream is cooled to about 5 °C (40 °F) and allowed to remain at that temperature for at least eight hours; under these conditions about half the butterfat in the cream crystallizes. The jagged crystals of fat inflict damage upon the fat globule membranes during churning, speeding the butter-making process.
Churning produces small butter grains floating in the water-based portion of the cream. This watery liquid is called buttermilk—although the buttermilk most common today is instead a directly fermented skimmed milk. The buttermilk is drained off; sometimes more buttermilk is removed by rinsing the grains with water. Then the grains are "worked": pressed and kneaded together. When prepared manually, this is done using wooden boards called scotch hands. This consolidates the butter into a solid mass and breaks up embedded pockets of buttermilk or water3 Types
